Industrial Maintenance

Details

APPLICATIONS:
Ecocare Clear Polyacrylate Based Coating is widely used on most metals, PCB Boards, electronic and electrical components, aerials, wires etc… Which are found indoor and outdoor.

BENEFITS:

• Colourless
• Resists Acid & Alkalies
• Waterproof
• Excellent Protection
• Prevents Arcing
• Multi-Purpose Application
• Resists Moisture & Corrosive Vapours
• Easy To Use
• Seals Completely

HANDLING PRECAUTIONS:
1. For professional use only. To be used in well ventilated environment.
2. In case of contact with eyes, rinse thoroughly with water and seek medical advice immediately.
3. If swallowed, take plenty of water and seek medical advice immediately.
4. Avoid prolonged contact with skin.
5. Put on gloves for sensitive skin.
6. Keep out of reach of children.
7. Additional information may be obtained from MaterialSafety Data Sheet (MSDS).

FOR AEROSOL PACKING:
1. Pressurized container. Do not pierce or burn after use
2. Do not expose to temperature beyond 400C
3. Flammable Propellant

DIRECTIONS:
Surface Preparation:
Remove all existing oils, dirt, rust and other contaminants from the surfaces. Ensure surface is dry before application. For Aerosol Packing
1. Shake well before use.
2. Hold can 20-25cm from target area and spray evenly.
3. Allow film to be semi-dry to give maximum protection.
4. For best results, apply 2 or 3 coats between intervals. For Bulk Packing
1. Shake well before use.
2. Apply on target area evenly using a brush or roller.
3. Allow film to be semi-dry to give maximum protection.
4. For best results, apply 2 or 3 coats of between intervals.

PROPERTIES:
Physical State                 : Liquid
Colour                             : Clear
Solubility (In Water)      : NA
Density                            : NA