Housekeeping

Details

APPLICATIONS:
Sani-Bowl WS is widely used in schools, commercial buildings, factories, hotels, construction areas etc, to remove dirt, stain and scale for maintenance and cleaning purposes. It is designed to use for removing stains on floor tiles, ceramic, stone, granite, concrete, toilet bowl, basin, and etc.

ADVANTAGES:

• EFFECTIVE

Sani-Bowl WS has an effective blend of penetrants with twice the power of muriatic acid to penetrate deep into pores and completely eliminate deposits. Works fast on heavy film, loose chunks and stains.

• ECONOMICAL

Sani-Bowl WS’s high concentration can be diluted up to 10 parts of water.

• SAFE ON ENVIRONMENT

It does not emit any harmful fumes during application compared to other ordinary acid products.

• DEODORIZES

Its pleasant perfumed feature helps to kill most odors and bacteria at source.

• DISINFECTANT

Sani-Bowl contains quaternary-ammonium disinfectant compound and is effective against a wide range of pathogenic micro-organisms that has the capacity to reduce the number of organisms on surfaces to level acceptable by the Public Health Authorities.

DIRECTIONS:
Flooring: Sani-Bowl WS can be used in its concentrated or diluted 1 part to 10 parts of water depending upon severity of build ups. Prior to use, test surface to be cleaned with Sani-Bowl WS.  Wet area to be treated thoroughly with solution and allow it to work for few minutes. Then scrub off stubborn stain with stiff brush, broom or scrap pad.
Toilet Bowls – First clean and disinfect the most heavily contaminated area by using a squeeze bottle or sprayer to apply Sani-Bowl WS under the rim of the toilet bowl. Use sufficient solution to ensure that some runs down into the water in the bowl. Use this solution in conjunction with a toilet brush to clean the seat and lid, then brush the inside walls, outlet pipe and under the rim before flushing. Dry the seat and lid with paper.
Urinals – Apply Sani-Bowl WS directly to stained areas and upper section of urinal and swab all surfaces with this solution. Stainless steel areas should be flushed immediately with water.

Physical Characteristics:
Appearance                                      : Blue solution.
Odour                                                : Pleasant scent.
pH                                                      : 2.0
Active Ingredient                             : Benzalkonium Chloride, Quaternary ammonium compound blended with biodegradable nonionic surfactant.